Lutron PHPM-PA-120-WH Lutron PHPM-PA-120-WH Phase Adaptive Power Module Lutron PHPM-PA-120-WH Phase Adaptive Power Module
Lutron PHPM-PA-120-WH
Lutron PHPM-PA-120-WH Phase Adaptive Power Module
Lutron PHPM-PA-120-WH Phase Adaptive Power Module

Lutron PHPM-PA-120-WH Phase Adaptive Power Module

$506.00
Brand: LutronReviews
Special order products normally take 10–14 business days to ship, depending on vendor availability.
  • Free US shipping on this item.
  • Special order: no returns without a manufacturer RMA. It ships from the manufacturer and lead times vary. If you cancel after your payment is captured (4 business days after the order is made), a 3% card processing fee is deducted. Wrong or defective items are always covered.
    Return terms: you pay shipping both ways, 3% card fee, 30% if opened
    • 30 daysfrom delivery to start a return
    • Shipping both waysto you and back to us, paid by you
    • 3% card feededucted from every refund
    • 30% open-box feeif the box has been opened
    • Special ordersno returns without a manufacturer RMA
    • Discontinued itemsnot returnable

    Wrong or defective items, and items damaged in transit with Package Protection, are always covered with no fees. Full return policy

  • Manufacturer's warranty from Lutron. Warranty
  • Volume order? Get a quote: chat with us, email us, or add it to your cart and download a PDF quote.
D Questions about this product? Daniel and the team reply fast, usually within minutes, Mon–Fri 8am–4pm ET. Chat with us now or email us.
Securing a home or business? Plan cameras and door access on a map of your own property with the free Silarius Site Planner. Try it free
More information View images
Reviews

Overview

The Lutron PHPM-PA-120-WH is a phase-adaptive power module that lets a zone on a Lutron control, such as a GRAFIK Eye control unit, dim a fully loaded 16 A, 120 V lighting circuit. It automatically selects leading-edge or trailing-edge dimming to suit the connected low-voltage transformers.

Key features

  • Dims one zone of up to a full 16 A (1920 W) at 120 V
  • Automatically selects forward phase (leading edge) or reverse phase (trailing edge) dimming based on the connected load
  • Controls incandescent, halogen, magnetic and electronic low-voltage, neon/cold cathode and Lutron Tu-Wire fluorescent ballasts
  • Up to 3 power modules can be wired to a single control zone
  • RTISS circuitry compensates for line voltage and frequency variations
  • Air-gap off and two diagnostic LEDs
  • Surface or recess mount; UL tested for environmental air handling spaces

Specifications

Control voltage 120 V~
Load voltage 120 V~
Capacity 16 A (1920 W)
Frequency 50/60 Hz
Minimum load 10 W
Terminals Up to two 12 AWG (2.5 mm²) wires each
Operating environment 32-104°F (0-40°C), <90% RH non-condensing, indoor only
Maximum heat output 135 BTU/hour
Mounting 2-gang US wallbox 3.5 in deep or 4 x 4 in junction box 2.1 in deep
Dimensions 6.3 x 5.1 x 1.2 in (160 x 129.5 x 30.5 mm)
Color White

Typical uses

  • Expanding a dimming zone beyond the capacity of the control itself
  • Dimming large low-voltage or halogen lighting loads
  • Residential and commercial lighting control installations

Shipping

Free US shipping on orders over $200. Orders under $200 ship at the rate shown at checkout. Oversized items ship by freight; we confirm the quote with you first.

Shipping policy

Returns

Special order: no returns without a manufacturer RMA. Wrong or defective items are always covered.

Start a return

Damaged or wrong item?

Tell us within 3 days of delivery with photos and we'll make it right, with no fee.

Contact us

Lutron warranty

This product is covered by the manufacturer's warranty. We help you with the claim from start to finish.

Warranty details

Support from real people

Setup questions, compatibility, firmware: chat with a specialist or email info@silarius.com, Monday to Friday, 8am to 4pm ET.

Chat with us

Business accounts

Approved businesses can pay on Net 30 / PO terms after their second completed order.

Ask about terms

Frequently Asked Questions

Can it switch non-dimmable loads?+
No. Lutron states the PHPM-PA is not for non-dim loads and points to the switching power module PHPM-SW-DV-WH for those.
How many power modules can share one control zone?+
Up to 3 power modules can be wired to a single zone.
What is the minimum load?+
The minimum load on the power module is 10 W.
How is it mounted?+
It surface or recess mounts to a 2-gang US wallbox 3.5 in deep or a 4 x 4 in junction box 2.1 in deep, within 7 degrees of vertical and with arrows facing up.
Can I mix lighting types on one module?+
Incandescent and electronic low-voltage sources can share a zone (up to 30% of capacity incandescent), but incandescent and magnetic low-voltage sources may not.

You may also like

Recently viewed