Complete your setup
Everything this camera needs, matched by our specialists. Silarius picks first.
The RDL RU-BTLA is a Bluetooth Line-Level Audio and Format-A Interface, as specified in the manufacturer's product listing.
The RU-BTLA is a Bluetooth audio receiving module with three sets of audio outputs: Balanced line-level XLR jacks, unbalanced line-level RCA phono jacks, and RDL® Format-A twisted pair RJ45s. Format-A outputs are at a fixed level and may be configured mono or stereo on a recessed front-panel slide switch. The line-level outputs are all controlled by a single adjustable LEVEL attenuator on the front panel, configured mono or stereo on a recessed front-panel slide switch. All outputs may be used simultaneously. The RU-BTLA features studio-quality circuits and analog filters to provide audio performance exceeding expectations from consumer interface technologies.
Pairing is initiated by a front-panel pushbutton. Pairing status is displayed on associated LEDs. A rear-panel terminal block allows the RU-BTLA pairing functions and status to be remote controlled by one or two separately available RDL remote controls. Pairing may be remotely initiated by dry contact closure.
The RU-BTLA can be sequentially paired with an unlimited number of Bluetooth devices. The most recently paired seven devices are retained in memory for re-pairing. Upon pairing to a new device, the oldest stored device is automatically deleted.
- Bluetooth 5.3 Audio Input for Installed Sound Systems
- Bluetooth LE (CIS) and Bluetooth Classic (A2DP) Audio Supported
- Supported Codecs: LC3 (BLE), AAC & SBC (A2DP)
- Intuitive Front-Panel Single Button Pairing with LED Status Indication
- Extended Range Under Ideal Conditions, Up To 100 Meters from a Class 1 Device (Pairing and Connection Range is Limited by Connected Device’s Range)
- Rack-Mounted, Free-Standing or Surface-Mounted Operation
- Module Setup Using a Terminal Program or a Bluetooth-Equipped Computer
- Customizable Module ID Name and Programming via Bluetooth Connection
- Supports One or Two RDL Pairing/Status Remote Controls ( D-RBTP or EU-RBTP ), Available Separately
- Remote Pairing Connections Compatible with Third-Party Dry Contacts The LED output is a 3.3 Vdc nominal level which: Remains High when paired, Low when unpaired, and alternates between high and low in pairing mode.
- Stereo Line-Level Balanced +4 dBu XLR and -10 dBV Unbalanced RCA Outputs
- Front-Panel Switch-Selectable Stereo or Mono Line-Level Outputs
- Front-Panel Flush Slotted Attenuator for XLR and RCA Line-Level Outputs
- Front-Panel Switch-Selectable Stereo or Mono Format-A Outputs
- Format-A Mono Outputs Switch-Selectable to Feed Pair A, B or C
- Format-A Stereo Outputs Feed Pairs B (Left Channel) and C (Right Channel)
- In Mono Mode, Daisy-Chain up to Three RU-BTLA Modules to One Format-A Receiver
- Any or All Audio Outputs May Be Used Concurrently
- Locally Powered by 24 Vdc or Remotely Powered Over Twisted Pair Cable from Format-A Receiver
- Format-A Signal and Power Pair Pass-Through on RJ45 Jacks
Shipping
Free US shipping on orders over $200. Orders under $200 ship at the rate shown at checkout. Oversized items ship by freight; we confirm the quote with you first.
Shipping policyReturns
Special order: no returns without a manufacturer RMA. Wrong or defective items are always covered.
Start a returnDamaged or wrong item?
Tell us within 3 days of delivery with photos and we'll make it right, with no fee.
Contact usRDL warranty
This product is covered by the manufacturer's warranty. We help you with the claim from start to finish.
Warranty detailsSupport from real people
Setup questions, compatibility, firmware: chat with a specialist or email info@silarius.com, Monday to Friday, 8am to 4pm ET.
Chat with usBusiness accounts
Approved businesses can pay on Net 30 / PO terms after their second completed order.
Ask about termsFrequently bought together
Save money buying these products together


