RDL SF-NP100A SF-NP100A Series Network to 100W Mono Audio Amplifier, 70V or 100V Output

RDL SF-NP100A Series Network to 100W Mono Audio Amplifier, 70V or 100V Output

$1,000.78
Brand: RDLReviews
Audio built in
Special order products normally take 10–14 business days to ship, depending on vendor availability.
  • Free US shipping on this item.
  • Special order: no returns without a manufacturer RMA. It ships from the manufacturer and lead times vary. If you cancel after your payment is captured (4 business days after the order is made), a 3% card processing fee is deducted. Wrong or defective items are always covered.
    Return terms: you pay shipping both ways, 3% card fee, 30% if opened
    • 30 daysfrom delivery to start a return
    • Shipping both waysto you and back to us, paid by you
    • 3% card feededucted from every refund
    • 30% open-box feeif the box has been opened
    • Special ordersno returns without a manufacturer RMA
    • Discontinued itemsnot returnable

    Wrong or defective items, and items damaged in transit with Package Protection, are always covered with no fees. Full return policy

  • Manufacturer's warranty from RDL. Warranty
  • Volume order? Get a quote: chat with us, email us, or add it to your cart and download a PDF quote.
D Questions about this product? Daniel and the team reply fast, usually within minutes, Mon–Fri 8am–4pm ET. Chat with us now or email us.
Outfitting a lobby, store or office? Plan the security side too: cameras, door access and network on a map, with the free Site Planner. Plan it free
More information View images
Reviews

The RDL SF-NP100A is a SF-NP100A Series Network to 100W Mono Audio Amplifier, 70V or 100V Output, as specified in the manufacturer's product listing.

The SF-NP100A is an audio power amplifier that receives four Dante (or AES67) network audio channels. It converts one of the Dante channels to a 70 V or 100 V constant voltage amplified output. The output provides 100 watts for a network digital audio level of 0 dBFS. The other three Dante audio channels are converted to RDL Format-A to feed additional amplifiers or other Format-A receivers.

Input gain is set by the installer using a rear-panel single-turn potentiometer with an associated dual-LED VU meter calibrated to 10 dB below maximum power output. The SF-NP100A is equipped with an internal VCA for setting the amplifier output level. The REMOTE CONTROL RJ45 jack provides for the connection of an RDL D*-RLC10KM type remote level control. It is also possible to use the RJ45 jack to connect an external 10 kΩ potentiometer or a 0 to 10 Vdc control voltage. VCA control insures long term noise-free level adjustment.

A selectable audio compressor is provided to add up to 15 dB additional headroom to the power amplifier input. The compressor is designed to remain aurally transparent using automatically adjusting attack and release times. The amplifier is equipped with both thermal and output short-circuit protection. The high-efficiency Class D output stage produces minimal heat for all levels of expected voice or music modulation. Valid synchronization to the Dante network is indicated by a green LED visible from the front of the unit.

  • 100 Watts RMS Constant Voltage Amplifier
  • 70 V or 100 V Output
  • Compatible with Dante or AES67 Network Audio Sources
  • Converts One Network Audio Signal to a Mono Constant Voltage Output
  • Converts Three Network Audio Signals to a Format-A Output on Pairs A, B & C
  • Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
  • 0 dBFS Input for 100 W Output
  • External Level Control Using RDL D-RLC10KM-Type Remote Level Controls with RJ45
  • Special Software Not Required for Module Setup
  • LED Indicators: Network Sync, Amplifier Output Level and Status, Correct dc Voltage on Format-A Output
  • High-Efficiency Class D Operation
  • Thermal and Short-Circuit Protection
  • Plenum Rated per UL 2043 Standard

Shipping

Free US shipping on orders over $200. Orders under $200 ship at the rate shown at checkout. Oversized items ship by freight; we confirm the quote with you first.

Shipping policy

Returns

Special order: no returns without a manufacturer RMA. Wrong or defective items are always covered.

Start a return

Damaged or wrong item?

Tell us within 3 days of delivery with photos and we'll make it right, with no fee.

Contact us

RDL warranty

This product is covered by the manufacturer's warranty. We help you with the claim from start to finish.

Warranty details

Support from real people

Setup questions, compatibility, firmware: chat with a specialist or email info@silarius.com, Monday to Friday, 8am to 4pm ET.

Chat with us

Business accounts

Approved businesses can pay on Net 30 / PO terms after their second completed order.

Ask about terms

You may also like

Recently viewed