Complete your setup
Everything this camera needs, matched by our specialists. Silarius picks first.
The Dual-band dual gigabit wireless access point (Model SILAP1G128) is a 802.11ac wireless access point independently developed by Silarius. The SILAP1G128 built-in 2 x 2:2 MIMO professional high-efficiency zero-order resonant antenna, Compliant with IEEE 802.11a/b/g/n/ac protocol, and supports max wireless access rate of 1200Mbps, which can provide a faster and better wireless connecting experience and wireless coverage. The SILAP1G128 can easily meet the best choice for various streaming media applications with high data volume. It can provide high-definition IP video with the best picture quality. It also supports VoIP and data applications with demanding service quality, and supports intelligent RF, QoS and Wireless Seam Roaming and other functions. Gigabit Ethernet port uplink is used to break through the limitation of 100M uplink rate and ensure wireless high-speed transmission, it supports PoE remote power supply, Cooperating with Silarius AC products series, it brings users an unprecedented fast Internet experience and safer access services. The SILAP1G128 is a round type AP, exquisite appearance and applicable for ceiling mounted installation.
|
Model |
SILAP1G128 |
|
Name |
Silarius 802.11ac 2 x 2:2 MIMO Wireless Access Point |
|
Spatial flow |
4 |
|
2.4G Transmission Rate (Max) |
300Mbps |
|
5G Transmission Rate (Max) |
867Mbps |
|
Wi-Fi Access Number (Max) |
128 |
|
Wi-Fi Concurrent Number (Recommended) |
64 |
|
Working Frequency |
802.11ac/n/a: 5.725GHz-5.850GHz, 5.15~5.25GHz |
|
802.11b/g/n: 2.4GHz-2.483GHz |
|
|
Modulation Technology |
OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16QAM@24Mbps, 64QAM@48/54Mbps DSSS: DBPSK@1Mbps, DQPSK@2Mbps, CCK@5.5/11Mbps MIMO-OFDM: MCS 0-31 MIMO-OFDM(11ac): MCS 0-9 |
|
Modulation Way |
11b:DSS:CCK@5.5/11Mbps, DQPSK@2Mbps, DBPSK@1Mbps 11a/g: OFDM:64QAM@48/54Mbps, 16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps 11n: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM 11ac:MIMO-OFDM:BPSK,QPSK, 16QAM, 64QAM, 256QAM |
|
Support Channel Number |
802.11a, 802.11n, 802.11ac(Compatible with 802.11a mode): 9 channels 802.11b, 802.11g, 802.11n(Compatible with 802.11b/g mode): 13 channels |
|
Channel Adjustment |
Support Auto, Manual Adjustment |
|
Power Adjustment |
Support |
|
RF Time Switch |
Support Turn on/off RF based on Specify Time Period |
|
Access Limited |
Support User Restrictions based on SSID |
|
English SSID |
Support |
|
SSID Hidden |
Support |
|
Load Balancing |
Support Intelligent Balance based on users, traffic and Frequency bands |
|
Bandwidth Limited |
Support Speed Limit based on STA/SSID/AP |
|
STA Related |
Support STA Abnormal Offline Detection, STA Burn-in Testing, STA-based Statistics and Status Query |
|
Link Integrity Detection |
Support |
|
Authentication Method |
Support Pre-shared Key, 802.1x Authentication |
|
Pre-shared Key |
WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK Mixed Encryption |
|
802.1x Authentication |
Support 802.1x one-key automatic configuration deployment, support 802.1x non-perceptual authentication,download the one-key automatic configuration tool when accessing for the first time to quickly complete wireless network configuration |
|
Black and White List |
Support Static Black and White List |
|
User Isolation |
Support Isolation between SSIDs, automatic VLAN grouping, user isolation under designated VLAN |
|
Prevent Terminal Stickiness |
Perceive the STA connected to the AP, and Intelligently Guide the STA to Access the best AP |
|
Prohibit Low rate Terminal Access |
Set a Threshold for the Speed of Access Terminals, prohibit weak Signal Terminals below a Certain Speed from Accessing, and Improve the Overall Network Speed |
|
High-density Access Scenario Optimization |
Support Broadcast Probe Request Response Control to Optimize High-density Access Scenarios |
|
ARP to Unicast |
Convert ARP Broadcast Messages to Unicast, Reduce Broadcast packets and Increase transmission speed |
|
FAT and FIT Integration |
Support the integration of FAT and FIT, switch flexibly between the two working modes of FAT and FIT. |
|
Channel Encryption |
Support |
|
Access Point VPN |
Support the encrypted data transmission communication with Silarius AC. Accessing the corporate intranet data resources is transmitted through an encrypted tunnel. |
|
Model |
SILAP1G128 |
|
Name |
Silarius 802.11ac 2 x 2:2 MIMO Wireless Access Point |
|
Spec |
Dual-Band Dual Gigabit |
|
Dimension |
ø205*38.5 mm |
|
Ethernet Port |
1*10/100Mbps + 1*100/1000Mbps |
|
PoE |
802.3af/at |
|
Antenna |
Built-in high gain PIFA antenna |
|
RST |
Support |
|
Working Temperature and Humidity |
-10℃～45℃, 10%～90%, Non-condensing |
|
Storage Temperature and Humidity |
-40℃～70℃, 10%～90%, Non-condensing |
Shipping
Free US shipping on orders over $200. Orders under $200 ship at the rate shown at checkout. Oversized items ship by freight; we confirm the quote with you first.
Shipping policyReturns
Return within 30 days of delivery. Opened items may carry an open-box fee of up to 30%, set by our QA team on inspection. Return shipping is paid by the customer.
Start a returnDamaged or wrong item?
Tell us within 3 days of delivery with photos and we'll make it right, with no fee.
Contact usSilarius Discontinued warranty
This product is covered by the manufacturer's warranty. We help you with the claim from start to finish.
Warranty detailsSupport from real people
Setup questions, compatibility, firmware: chat with a specialist or email info@silarius.com, Monday to Friday, 8am to 4pm ET.
Chat with usBusiness accounts
Approved businesses can pay on Net 30 / PO terms after their second completed order.
Ask about terms
Frequently bought together
Save money buying these products together
